|
|
|
Remote Control User Reviews
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
User reviews for the Denon Aktis RC-8000 from Denon Electronics. |
| Ratings | Reviews | MSRP (USD) |
Average: 2.90/5.00 Median: 2.83/5.00 | 42 | $449 |
The Denon Aktis RC-8000 is a touchscreen learning remote control with multi-direction joystick. It features an optional RF basestation, high-resolution backlit screen, control of up to 23 components and a USB port for PC connectivity.
Find universal remotes at: | |
|
|
Navigation: [ < Previous|Next > ] Now viewing user reviews page 3 of 6 for the Denon Aktis RC-8000 remote.
|
|
Written by DanInSFBay from SFBay. The reviewer has used this remote control for 1-2 years. |
Review 27 made on October 7, 2003. |
Strengths: |
Weaknesses: |
|
Review: | A work-around for my Denon AKTIS RC8000 remote programming problems.
Programming my remote worked until recently, but after a Win update, it wouldn't download etc. I run Win2000 with all updates to 9/03, MSOffice XP and IE6.0
In Summary: Upload your current remote, make changes, download --->DO NOT SAVE BEFORE DOWNLOADING<--- Test for changes/errors, restart rc8000 editor repeat process.
After fooling around for a long time, I did this process twice and it worked. To the best of my memory this is it. Please feel free to add improvements especially for idiosyncrasies of other Win versions
1) Reset remote via tiny pinhole switch in battery compartment 2) Just to be sure the unit is reset, remove batteries during next part 3) Completely remove the old RC8000.exe (win add/remove programs) 4) Find and delete any "RcxUsbA.*" files (RcxUsbA.inf, RcxUsbA.sys) 5) Find possible "RCXINUSE" and delete 6) Run RegClean.exe to clean up the registry (Google RegClean.exe) 7) Reinstall RC8000.exe 8) Open up "Unplug/Eject hardware" (this is the box that pops up when you plug/unplug a USB cable in with a device connected) 9) Install new batteries needed for reprogramming, not rechargeable which have a lower voltage 10) Plug in the USB remote to PC 11) Note the driver install process and get the new driver from "C:\Program Files\DENON\RC-8000 Editor" folder 12) Note the successful USB connection in "Unplug/Eject hardware" and check "properties" if you like to see that it is working 13) Check remote version number in remote setup, if it is not 3.13 then A) Turn off all other programs (mail) so nothing can interrupt the download/update process B) Run RCXUPDATE1_5.exe to 3.13 if required. Mine worked on top of my previous update when my remote was hosed due to an interrupted program download. C) Note the download window progress D) When finished (a long time), you should be at version 3.13, check the remote 14) Run RegClean.exe to clean up the registry again!
Now that everything is ready: 1) Open the "C:\Program Files\DENON\RC-8000 Editor" folder and watch for files created and deleted like the "RCXINUSE" during the next steps. 2) Turn off all other programs (mail) so nothing can interrupt the download/update process 3) Start the RC8000 Editor program 4) Do NOT open any files or do anything else 5) Upload the contents of the remote 6) Make changes 7) DO NOT SAVE CHANGES in a file 8) Download changes to remote 9) Save the file if you like for a backup reference. 10) Close the RC8000 Editor 11) Find possible "RCXINUSE" and delete
If you need to make more changes, Restart the RC8000 Editor and repeat.
Remember, the only GOOD copy of the remote is IN the remote! You'll have to start from a full reset with a default setup if it goes bad. You then use your backup reference to help remember what you did.
|
|
Quality: | Features: | Value: |
|
|
|
Navigation: [ < Previous|Next > ] Now viewing user reviews page 3 of 6 for the Denon Aktis RC-8000 remote.
|
|
|
|
|
|