These instructions and codes are valid for the GE RM94927, RM94926, RM94925, RM94905, RM94904, RM94903, RM94902 & RM94901 model remote controls.

How to enter device codes: Manually turn on the device you would like to control. Press and hold the [CODE SEARCH] button until the LED lights. Press and release the button that corresponds to the device you want to program. The LED will blink and then remain lit. Enter the three-digit code number using the keypad. After the code is entered, the LED will turn off. If the code is not valid the LED will blink; try again. Test the code by pointing at your device and pressing the [POWER] button. If your device does not respond, try the other codes. If none work, try the Code Search method described below. To enter codes for the Audio or Aux devices (RM94927, RM94926 or RM94925 only): If you have not already programmed the AUX button for an audio device, you can assign a second TV, VCR, DVD, CD, Satellite or Cable Box. Manually turn on the device you would like to control. Press and hold the [CODE SEARCH] button until the LED lights. Press and release the button that corresponds to the device you want to program. The LED will blink and then remain lit. Next, press the button for the device you want to program (TV, VCR, SAT, DVD). Press DBS for a cable box and DVD for a CD player. Enter the three-digit code number using the keypad. After the code is entered, the LED will turn off. If the code is not valid the LED will blink; try again. Test the code by pointing at your device and pressing the [POWER] button. If your device does not respond, try the other codes. If none work, try the Code Search method described below. To use the code search function: Manually turn on the device you would like to control. Press and hold the [CODE SEARCH] button until the LED lights. Press and release the button that corresponds to the device you want to program. The LED will blink and then remain lit. (For programming a different type of device to the AUX button, follow this by pressing the type of device as described above). Press the [ON/OFF] button until your device turns off. When it does, press the [ENTER] button. The LED will turn off. To read back the programmed code: Press and hold the [CODE SEARCH] button until the LED lights. Press and release the button that corresponds to the device you want to read the code from. The LED will blink once. (For the AUX button, follow this with the type of programmed device as described above). Press and release the [CODE SEARCH] button. The LED will turn off. Starting with 0 on the keypad, press the number buttons in order until the LED blinks. This is the first number. Repeat this step until you have retrieved all three digits of the code. Sleep Timer: The Sleep Function will turn off your TV after a designated amount of time, from 1 to 99 minutes. Press and hold the [SLEEP] button until the LED lights. Enter the time in minutes on the keypad, from 01 to 99 minutes. Leave the remote aimed at your television. To Cancel the Sleep Timer: Press and hold the [SLEEP] button until the LED blinks, or Press the [ON/OFF] button, turning your television off.

Codes for RM94927, RM94926, RM94925, RM94905, RM94904, RM94903, RM94902 & RM94901:

| Cable Boxes | Televisions | VCRs |

RM94927, RM94926 & RM94925:

| CD Players | DVD Players | LD Players |
| Receivers | Satellite Receivers |

Return to Programming Your Remote...