The following page was printed from RemoteCentral.com:
This Wiki entry is maintained by Remote Central members - so if you spot an error or have additional information, please update it!
| | Brand: | Panasonic |
Device Type: | Television |
Model/Series: | TH-42PH11UK |
Model Year: | Unknown |
Configurations: | Search the file area |
| | | | | | Notes: | IR "gotcha" - This model has two HDMI inputs; 2A and 2B. There is only an IR command for "Input 2" and it will only toggle between the two. The only workaround is to go to a known input such as PC, then issue the correct number of "Input" commands for your situation. There is discrete RS232 control of these inputs, as well as aspect ratio and volume level presets 0%, 20%, 40%, 60%, 80%, 100% (assuming you have added speakers to this commercial monitor) |
| |
|
|
Input Options
| | Infrared: | Yes |
IR Input Jack: | No |
Radio Frequency: | No |
RS-232 (Serial): | Yes |
Network IP: | No |
Bluetooth: | No |
USB: | No |
DC Trigger: | No |
| | | Output Ports
| | IR Output Jack: | No |
RS-232 Output: | No |
DC Trigger: | No |
| |
| |
|
Discrete Codes
| |
Power: | Yes |
Inputs: | Yes |
Sound Modes: | N/A |
Picture Modes: | N/A |
Screen Modes: | No |
| |
| Delays/Timings
| | Power On: | 4.00 seconds |
Switch Inputs: | N/A |
Inter-command: | N/A |
| |
|
|
|
Important Codes & Commands |
No codes have been added for this model.
|
|
No files have been uploaded for this model. Use the red Wiki Toolbox below to upload a file! |
|
About this page...
This page contains information on how the Panasonic TH-42PH11UK can be controlled, along with useful tips, tricks and commands to make integrating this device into a universal remote control or other control system faster and more reliable.
This entry was last updated on Thursday June 4, 2009 at 21:30 by jimstolz76.
|