The following page was printed from RemoteCentral.com:
This Wiki entry is maintained by Remote Central members - so if you spot an error or have additional information, please update it!
| | Brand: | Velodyne |
Device Type: | Subwoofer |
Model/Series: | DD-10 |
Model Year: | Unknown |
Information: | [Link: velodyne.com] |
Configurations: | Search the file area |
| | | | | | Dimensions: | 11.75" wide × 11.75" high × 13.50" deep 29.84 cm × 29.84 cm × 34.29 cm |
| | | | | | Notes: | Digital Drive series. Firmware can be updated over serial. |
| |
|
|
Input Options
| | Infrared: | Yes |
IR Input Jack: | Yes |
Radio Frequency: | No |
RS-232 (Serial): | Yes |
Network IP: | No |
Bluetooth: | No |
USB: | No |
DC Trigger: | No |
| | | Output Ports
| | IR Output Jack: | No |
RS-232 Output: | Yes |
DC Trigger: | No |
| |
| |
|
Discrete Codes
| |
Power: | Yes |
Inputs: | N/A |
Sound Modes: | Yes |
Picture Modes: | N/A |
Screen Modes: | N/A |
| |
| Delays/Timings
| | Power On: | Unknown |
Switch Inputs: | Unknown |
Inter-command: | Unknown |
| |
|
|
|
Important Codes & Commands |
No codes have been added for this model.
|
|
No files have been uploaded for this model. Use the red Wiki Toolbox below to upload a file! |
|
About this page...
This page contains information on how the Velodyne DD-10 can be controlled, along with useful tips, tricks and commands to make integrating this device into a universal remote control or other control system faster and more reliable.
This entry was last updated on Tuesday April 28, 2009 at 02:55 by Daniel Tonks.
|